
RemOutlet® DC operates on just a dry closure. It can switch up to 15 A. |
| Control Almost Anything With RemOutlet® Power Controllers |
| www.RemOutlet.com |
RemOutlet® comes with a 6 foot cord |

| www.Remote-Outlet.com |



| | More Information | | Order By Check | | Shipping Charges | | Replacement Parts | | Privacy Policy | |
| Dimensions are approx. 9" x 4" and 3" deep. |
| LINE and LOAD indicators show status. CONTROL is 12 VDC. TALLY is a dry contact closure that follows LOAD indicator. |
| MANUAL ON switch powers outlet immediately. RemOutlet® can switch up to 15 A. |
| Now $179 |
RemOutlet® Reboot outlets are always ON until remotely switched off |


| LOAD1 and LOAD2 indicators show status of each separate outlet. CONTROL is 12 VDC. TALLY is an optional dry contact that switches to ground during reboot. |
| RemOutlet® Original |
| RemOutlet® Reboot |
| Now $99 |
RemOutlet® Reboot LT is a compact version capable of 5 A. service |


| RemOutlet® Reboot LT |
| Control box sits between AC plug and molded AC outlet. CONTROL is 12 VDC & TALLY is an optional dry contact closure that follows the load status. |

| www.Remote-Outlet.com |
| Now $259 |
| Now $139 |
RemOutlet® Mini is a compact version capable of 10 A. service |
| RemOutlet® Mini |

| RemOutlet® Mini has one outlet along with a Manual ON Override switch which powers the outlet immediately. 12 VDC control standard - Tally / Indicator output optional. |
| www.Remote-Outlet.com |
| www.Remote-Outlet.com |

| Specifications and product depictions may vary because of our process of constant improvement. |
| Now $239 |


| RemOutlet® DC |
| Call (609) 647-9677 to place your order by phone |
|
|

| Now $349 Model: 3PHPRO-3 3 phase monitor |
| The 3 Phase Proportional AC line voltage monitor will output an adjustable DC voltage that is designed to be set at 1/100 of the line voltage for remote monitoring purposes. Galvanic isolation between the 240 line phases and the low-voltage DC outputs. A 120 VAC line voltage monitor is also available. |
| Example: If the phases of the AC line voltage were 240, 237 and 238 V, the DC samples would be calibrated to 2.40 volts, 2.37 volts and 2.38 volts using the front panel DC sample adjustments. |
| Now $199 Model: 1PHPRO 120 VAC monitor |
|
|

| 120 VAC Line Voltage Monitor. Plug into any AC outlet to monitor low-voltage AC waveform and DC output. BNC AC output for use with oscilloscope or spectrum analyzer. The DC output is adjustable to create a calibration point and is proportional to the 120 VAC line voltage. |
| The AC Power Controller Experts. |

| Now $179 |

| RemOutlet® Reboot Mini |
